
Custom Metal Awnings in Houston, TX Built for Gulf Coast Weather
Steel awnings designed, fabricated and installed by a locally owned crew with over 30 years of experience. Low upkeep shade that stands up to sun, storms and salt air.
Metal Awnings in Houston, TX for a Roof You Only Build Once
A metal awning is a roof you put up once and then stop worrying about. American Awning & Carport Company designs and builds metal awnings in Houston, TX and across the Bay Area from our shop in La Porte. Each frame and roof is fabricated to fit the wall, door or patio it covers. Call (281) 867-9954 to set up a free estimate.
Homeowners choose metal over cloth for one main reason: it holds up. A steel frame under a metal roof shrugs off the summer sun that fades fabric, sheds the heavy rain of an afternoon storm, and needs little more than a rinse now and then.
We build fixed frame awnings over back doors, windows, patios, side entries and walkways. We also build covers that extend off a garage or tie into a carport, and every one is drawn for its spot rather than pulled from a kit.
- Over 30 years of experience
- Licensed & Insured
- Locally owned and owner-operated
- Free estimates
- Military discount
Signs a Steel Awning Is the Right Fit for Your Home
Most people call us after a problem has nagged them for a summer or two. If a few of these sound familiar, a permanent metal cover is worth a look.
- A back door or patio that bakes in the afternoon sun from spring through fall
- Rain blowing onto a doorway or soaking the step during every storm
- A cloth awning that has faded, torn or sagged and needs replacing again
- West or south windows that heat up a room all afternoon
- An open walkway between the house and the garage or carport
- A wish for shade that needs no seasonal care
A metal roof answers each of these with one fixed structure. It keeps working through every season without the cleaning and recovering that cloth needs.

How We Build and Install Metal Awnings
Every job starts at your property and ends with a walkthrough, with the fabrication done in our own shop in between. You know what happens next at each stage before any work begins.
-
Measuring for Your Metal Awning
We measure the wall, opening or patio, check the roofline and fascia, and talk through how much shade and rain cover you want.
-
Designing the Awning Frame and Roof
We lay out the frame, the projection, the pitch for drainage and the finish color, so the awning suits the house it hangs on.
-
Fabricating the Steel in Our Shop
Our crew cuts and fabricates the steel for your layout, so every part arrives ready to fit instead of forced into place.
-
Installing Your Fixed Awning
Most residential awnings go up in about one to three days, depending on size, design and site. We check every connection before we leave.
Steel Awnings Built for Coastal Wind and Salt Air
Steel gives an awning its strength. A steel frame resists the bending and twisting that wind puts on a structure hanging off a wall, and it carries a solid metal roof without sagging in the middle. That stiffness is why steel awnings are the usual choice for wide spans over patios and long walkways.
Near Galveston Bay, the air carries salt and moisture that go to work on bare metal. We pay close attention to finishes and fasteners for that reason. Each frame is designed so water drains off instead of sitting in the joints where rust starts.
Wind is the other test. Hurricane season and summer squalls push hard on any roof that sticks out from a building, so the attachment matters as much as the awning itself. We anchor into solid framing rather than siding or trim, and we keep the projection in proportion to what holds it up.

Fixed Awning Options Over Doors, Windows and Patios
A fixed awning stays in place all year, which keeps it simple and sturdy. Over a front or back door, a short awning keeps rain off the step and off you while you find your keys. Over windows, a row of matching awnings cuts afternoon heat before it reaches the glass.
Over a patio, the awning becomes an outdoor roof. Larger covers can reach well out from the house, and we plan the slope and gutter line so runoff lands away from the slab and the foundation. When shade over the whole back yard is the goal, our patio and deck awnings are planned around how you use that space.
Every design starts with a free visit to your home. New projects then follow the same custom awning installation process we use for every house we work on.

Metal Awning for Carport Use and Garage Fronts
Some customers do not need a full carport. They need a metal awning for carport use: a steel cover that extends off the house or garage to shelter one vehicle, a golf cart or a boat trailer. Because the house wall carries one side, it can take up less of the driveway than a freestanding structure.
We also build metal awnings that bridge the gap between an existing carport and a side door, so you can walk from the car to the house without getting wet. The joint between the two roofs is planned so water runs away from both, since that seam is where leaks usually begin. The result feels like one covered path from the driveway to the door.
What Affects the Cost of a Metal Awning in Houston
Our metal awnings in Houston, TX are all custom, so the price comes from your project rather than a chart. The free estimate gives you a real number after we have seen the site.
- The width and how far the awning projects from the wall
- Roof style and pitch, including any gutter
- Wall brackets or support posts
- Finish and color choices
- The wall surface: brick, siding, stucco or fascia
- Site access and any tie-in to a carport or existing roof
We walk through each of these during the visit at your home. You can see where the cost comes from and where a change in size or style would make a difference.

Why Homeowners Choose Our Steel Awning Crew
We have designed, fabricated and installed awnings and carports around La Porte and Houston for over 30 years. The company is locally owned and owner-operated. The people who measure your house are part of the same small crew that cuts the steel and sets the brackets. Homeowners shopping for metal awnings in Houston, TX get one team, one point of contact and one standard from start to finish.
That matters on a metal awning, where small details decide how long it lasts: how it drains, how it attaches and how the finish holds up near the coast. We build each one for the house it hangs on, and we are a phone call away if you need us after the job is done.

Metal Awnings for La Porte, Pasadena and Bay Area Homes
Our shop sits in La Porte, so homes along the bay and across southeast Houston are close by. We build covers for houses in La Porte, metal awnings in Pasadena and South Houston, and as far south as Alvin.
Closer to the water, salt air and open wind shape the finish and anchoring we recommend. Farther inland, the summer sun is usually the bigger concern, and the design leans toward shade and heat control. Inside the city, metal awnings in Houston, TX often go over narrow side yards and older brick homes, where a slim wall-mounted cover fits best. Metal is one part of our full range of awning services, which also covers fabric, patio and commercial work.

Metal Awning Questions From Houston Homeowners
How long does a metal awning last in Houston weather?
A well-built metal awning can serve for many years when the frame drains properly, the finish suits coastal air and the fasteners stay tight. The biggest threats here are rust at joints that hold water and loose connections after strong storms. A quick look after hurricane season and an occasional rinse go a long way toward keeping it in good shape.
Is a metal awning better than a fabric one?
It depends on what you want from it. Metal needs less upkeep, stands up better to sun and storms, and works well as a permanent roof over a patio or door. Fabric offers more colors and a softer look, which many people like on windows and storefronts. We build both, and we will tell you plainly which one suits your house and how you use it.
Will a metal awning make my patio hotter?
A metal roof blocks direct sun, so the space underneath is shaded and far more comfortable than open concrete in July. The roof surface itself does get warm, which is why pitch, height and finish color matter. A lighter finish reflects more heat, and enough height lets warm air move out from under the awning instead of collecting near your head.
Can a metal awning attach to a brick house?
Yes. We attach metal awnings to brick, siding, stucco and wood fascia, using hardware suited to each surface. On brick we anchor into the masonry, and on siding we locate the framing behind it so the structure, not the cladding, carries the load. The attachment and the flashing that keeps water from getting behind the wall are planned during the estimate.
Can you match a metal awning to my home's trim color?
In most cases, yes. Finish color is part of the design conversation at the estimate, and we aim for a color that ties the awning into the trim, gutters or roof of the house. A good match makes the awning look like it was always part of the home, while a contrasting color can turn a plain back door into a clear focal point.

Put a Permanent Steel Roof Over Your Door or Patio
A metal awning is one of the few home projects you build once and then stop thinking about. Call (281) 867-9954 Monday through Saturday, 8:00 AM to 5:00 PM, and we will measure, design and price one for your house at no cost.